Christophera
04-04-2007, 04:40 AM
Chris,
You say earlier, that yours is the "only feasible, realistic explanation in existence".
It took a while to realize that was the case. Now that I've said so, it is curious to see how little opposition there is. Folks often have no alternative, they just don't like the one I present because they have to consider just how deeply they've been decieved for how long, why.
There were banks of lifts and neither building was fully let.
What's wrong with shutting down three or four lift shafts (one whole bank)and planting the explosives in them?
A bit of scaffolding, take the sides out of a couple of lifts and use one lift to plant the stuff, while the other lift ferried stuff up to it.
Plant the stuff?
You make it sound like you are planting corn. This is 2 feet of concrete at the top and 12 feet at the bottom.
http://algoxy.com/psych/images/southcorestands.gif
Imagine one of these.
http://partshq.com/images/Pictures/250jls.gif
Hooked up to about 200 CFM at 120 PSI from a four cylynder diesel compressor less than 400 feet away (line loss). Two men take turns of about 10 minutes running it because it's so high energy it beats the cr*p out of you.
To get enough holes dirlled and "planted" in 1/2 of the foot print vertically for 300 foot of the WTC core off of scaffold in an unused area you need c to c's of holes from 2 fet to 4 feet approximately. (just because there are vacancies it doesn't mean any of your vertical transportation needs can be reduced)
The noise it makes leaves you feeling that a jackhammer is rather pleasant.
It is called a sinker drill and it the only way to efficiently drill horizontally in concrete in the sizes needed. About 1 inch in DIA and up to 6 feet deep. (watch out for the high temper steel rebar it will imediately flatten your carbide insert drill bits). It would take 20 drills a month minimum to drill that many holes at the mid level where the average is 5 feet deep.
This is primarily an explosion of concrete by high explosives, not steel. (Those light colored metal members flying out in front of the blast wave is aluminum facade). The basic concrete expansion shows VERY well placed explosives with the lack of spikes of "rifleshot" breakage and instead being very round blast wave with uniform sized pieces. Only uniform distribution and perfect placement can bring this about. It is an expanding sphere of delayed explosions of concrete, descending. Actually a serious phenomena of controlled demolition as it is, the entire tower IS a precision "engneered" explosive device.
http://algoxy.com/psych/images/corefacesexploding.jpg
Please detail how 47 steel core columns are cut with high explosives without changing that image to something else, something it wasn't.
Maybe show some steel columns that were cut by the kind of "charges you can plant" like corn. mo thinks one can get an even 90 degree cut with square edges by planting charges in satchels on one side of a tube column. Maybe you and he should work together figuring out the "planting" scheme.
You could do the scaffolding months before, what's more innocent than scaffolding? Not that anybody would see it. You could plant the explosives in seven days of 12 hr nights.
What's wrong with that?
Not me, maybe you could though.
You say earlier, that yours is the "only feasible, realistic explanation in existence".
It took a while to realize that was the case. Now that I've said so, it is curious to see how little opposition there is. Folks often have no alternative, they just don't like the one I present because they have to consider just how deeply they've been decieved for how long, why.
There were banks of lifts and neither building was fully let.
What's wrong with shutting down three or four lift shafts (one whole bank)and planting the explosives in them?
A bit of scaffolding, take the sides out of a couple of lifts and use one lift to plant the stuff, while the other lift ferried stuff up to it.
Plant the stuff?
You make it sound like you are planting corn. This is 2 feet of concrete at the top and 12 feet at the bottom.
http://algoxy.com/psych/images/southcorestands.gif
Imagine one of these.
http://partshq.com/images/Pictures/250jls.gif
Hooked up to about 200 CFM at 120 PSI from a four cylynder diesel compressor less than 400 feet away (line loss). Two men take turns of about 10 minutes running it because it's so high energy it beats the cr*p out of you.
To get enough holes dirlled and "planted" in 1/2 of the foot print vertically for 300 foot of the WTC core off of scaffold in an unused area you need c to c's of holes from 2 fet to 4 feet approximately. (just because there are vacancies it doesn't mean any of your vertical transportation needs can be reduced)
The noise it makes leaves you feeling that a jackhammer is rather pleasant.
It is called a sinker drill and it the only way to efficiently drill horizontally in concrete in the sizes needed. About 1 inch in DIA and up to 6 feet deep. (watch out for the high temper steel rebar it will imediately flatten your carbide insert drill bits). It would take 20 drills a month minimum to drill that many holes at the mid level where the average is 5 feet deep.
This is primarily an explosion of concrete by high explosives, not steel. (Those light colored metal members flying out in front of the blast wave is aluminum facade). The basic concrete expansion shows VERY well placed explosives with the lack of spikes of "rifleshot" breakage and instead being very round blast wave with uniform sized pieces. Only uniform distribution and perfect placement can bring this about. It is an expanding sphere of delayed explosions of concrete, descending. Actually a serious phenomena of controlled demolition as it is, the entire tower IS a precision "engneered" explosive device.
http://algoxy.com/psych/images/corefacesexploding.jpg
Please detail how 47 steel core columns are cut with high explosives without changing that image to something else, something it wasn't.
Maybe show some steel columns that were cut by the kind of "charges you can plant" like corn. mo thinks one can get an even 90 degree cut with square edges by planting charges in satchels on one side of a tube column. Maybe you and he should work together figuring out the "planting" scheme.
You could do the scaffolding months before, what's more innocent than scaffolding? Not that anybody would see it. You could plant the explosives in seven days of 12 hr nights.
What's wrong with that?
Not me, maybe you could though.